Metal Cleaners Manufacturers
We provide different variety of metal cleaners chemical products
A. DEGREASING CHEMICALS
Degreasing is an important stage in pretreatment. These chemical useful for cleaning iron and steel by immersion or spray method.
Degreasing application can be applied at 500C to 900C. 5 – 10 minute wiping, immersion or spray. Temperature, time and concentration are the important parameters. If concentration or temperature is low, it can be compensated by long time application. Generally, it is preferred to use soft water in degreasing baths.
We have different kind of degreasing products
1. Alkaline Degreaser
Alkaline type degreaser is very effective in removing 100% oil content when compared to other types of degreaser. Alkaline degreaser was able to convert insoluble fatty acid to soluble fatty acid.Â
The parts to be cleaned are immersed in this bath at recommended temperature and time. Strong alkaline cleaners are avoided in the case of the manganese phosphate process as they can cause inferior quality coating.
 There is a different type of Alkaline Degreaser
- Degreaser for Both Dip and Spray application
- Heavy Duty & light Duty degreaser
- Ambient &Hot Temperature Degreaser
- Alkaline degreaser for both Ferrous and non Ferrous components
- Non etching alkaline degreaserÂ
2. Acidic Degreaser
Acidic degreaser is formulated to effectively clean oils from iron, Aluminium, Mild Steel and casting surface. There is different type of Acidic degreaser working at Ambient to hot temperature.
B. Derusting Chemicals
When Iron or Steel is exposed to humid atmosphere, the corrosion process is initiated resulting in rust information. Rust is soluble in acids such as Hydrochloric acid, Sulphuric acid, Phosphoric acid, and hence it can be removed by acid cleaning.
Derusting Chemicals are very effective in removing rust, scales, welding scales besides removing thin film of oil and grease. It is not desirable to treat metals in hydrochloric acid to remove rust.
These chemical is used for iron, steel & some non- ferrous surface. It is used by immersion. The product is balance formulation that, give smooth performance.
Derusting chemicals is relatively safe chemicals for chemical cleaning, since the product has been formulated wholly with environmental safe acids, surfactants, inhibitors etc.
We have different kind of Derusting Chemicals products.
E. 2 IN 1 Cleaner
2 IN 1 is chemical suitable for simultaneous degrease, de-rust. Being these two actions by a one chemical, it is conventionally called 2 in 1 chemical.
The product is used for iron, steel & some non- ferrous surface. It is used by immersion. The product is balance formulation that, give smooth performance.
F. 3 IN 1 Cleaner
3 IN 1 is chemical suitable for simultaneous degrease, de-rust & phosphate the metal surface. Being these three actions by a one chemical, it is conventionally called 3 in 1 chemical.
3 in 1 is normally applied by hand application using brush or swabbing however it can be use in immersion application The treated metal surface is ideal base for subsequent painting.
It can effectively use as line deruster and in process cleaner prior to painting or any other similar metal treatment operation